Visit My Website, A Personal Gallery!


Click on Logo Bar Below, to visit my website!


Wednesday, June 23, 2010

The Mirrix is perfect for the Weighted Warps!

I have completed my base pattern, for this cuff, which includes my personal technique of a 'wavy loom woven edge'. The Mirrix did an outstanding job and is designed perfectly for this method of beading.

No finagling with the weighted warps, as I have with other set ups trying to complete this same method of loom weaving. Depending on the pattern, each of the weighted warps move up in various lengths. This is where the suggestion of a 'bobbin' comes into serious thought. However, I did 'swap out' the outer right two weighted warps, when my right indent was the furthest inward. Notice where the bobbins lay now, opposed to an earlier picture, below, when I started.

I'll be including finer details of the finishing process, but I do want to share one detail that may make your loom weaving better if you know ahead of time and would like to try this method out now. The outer weighted warp is shorter because that warp has a tendency to be 'pulled inside' of the end bead. The picture below shows how the warp is 'inside' the end bead, when my needle has it's final 'pull', securing a row.

So if any of the warps are in need of a bobbin, it would have to be the 'outer right warp', for any pattern. Don't pull the warp so far into the bead, or your weaving will 'ruffle' along this edge. Logically, with movement of your woven piece, while wearing, the threads loosen up. Therefore, having too much 'warp inside', it will work its way out eventually. I offer a finishing technique that finalizes this 'weighted warp method', and limits the amount of 'slack' caused by the outside warp. This step can be completed 'with' or 'without' adding a 'bead edging'.

The base pattern is complete! Here is a picture of the cuff, titled "Rapunzel"!


Not much more till this cuff can be worn, but these details will be offered later. I always suggest knowing your exact ending, before you start. This is important for mapping out your pattern, as well as how many rows you need to weave. I have offered a little insight into 'mapping out your cuff size', in an earlier post. But again, you should start to get a feel for the 'number of loom woven rows' vs. 'measurement when cut from the loom'. I'll also start to get into how to consider the clasp attachment and the different styles to consider, at a later time.

There is one other technique I would like to work, on this Mirrix Loom, I think it will work beautifully. I also want to complete a Split Loomed Necklace, with some of my usual loom weaving techniques used in all of my work, as well as weaving another cuff with a theme seen often, but not in the manner I hope to pose! Again, I'll be sharing thoughts along the way!

MCN:EG9V2-117QX-23T1Y

2 comments:

  1. WOW!! It's fabulous, Erin! Really beautiful, this loom really works for you (I think they should send your money back - you are valuable advertising, lol!)

    Can't wait for THE BOOK!!!

    ReplyDelete
  2. This is absolutely stunning - your talent knows no bounds!

    ReplyDelete