Visit My Website, A Personal Gallery!


Click on Logo Bar Below, to visit my website!


Thursday, March 24, 2011

Why a ©Weighted Warp?

I have been working on my ascent upwards, on the Lotus SLN. Here are a few pictures to show you my start.

The picture above is an overall view. Besides the upper straps not being completed, there is only 'one' part missing, the petal 'front and center' of the Lotus. I will secure that into place, but wanted to get started on the upper straps.

Here is a picture, back when I started this weaving.

The Mirrix was the perfect loom for warping with so many warps, needing to control the tension on these warps, (Mirrix has wing nuts on each side to adjust tension), and using ©Weighted Warps so each warp is movable and able to decrease/increase anytime as I loom. Let me share what I planned and why I wanted to use the Mirrix with ©Weighted Warps.

Since this is an SLN, (Split Loomed Necklace), I knew the center focal would eventually 'split' into creating the two upper straps, of the finished necklace. How I wanted to accomplish this was to create a unique 'cut out' design, intermixed with some graphing of a picture. My design idea also included what type of 'split' would occur, at the very start of this process. I decided on a wide scoop look, with some indentations along the edge of the straps. (Later I'll share more about how I created the 'scoop design' as you see below.)

After sectioning off the 'center and two straps', I was now ready to begin some creative 'cut outs'.



You can see the one cut out, I was able to create because the warps were not secured to the loom. The ©Weighted Warps allowed me to move any warp aside, include them in my rows of beads to indent and add them back in to close off the cut out again. All the while, each of the warps, secured to a ©Weighted Warp weight, were movable, had adjustable lengths and kept the tension for straight weaving as well.

Many lacy designs can be completed, using my ©Weighted Warp method, which I hope to get into more detail, later on. Much more to loom weave, as I ascend, which will include a graphed pattern I created. This pattern will splay out using 11/o Delica Silver Metallic beads and 11/o Delica Matte Black beads.




Also not mentioned yet, is the edging I will include to complete the upper straps. I will use the Silver Metallic beads to line not only each outside edge, of each strap, but will also line the entire area of the cut out!

2 comments:

  1. A fantastic necklace there you weave.
    I'm really curious how it looks finished.

    ReplyDelete
  2. Thank you for your kind words, Erin. It was really great working with you on your Weighted Warps, they look wonderful!

    Vanessa ;)

    ReplyDelete